Elysator Accessories

 

Digital Indicator

Digital Indicator can either replace the analog or be mounted in serial with it. (When mounting in parallel only half the current will read out.)  The indicator can either be installed in the control room or nearby the Elysator.  The transmitter for the indicator is premounted on the Elysator.  If ordered with the initial order.  This is an optional extra item at additional cost.

 

Circulator pumps, close-coupled type

FEATURE AND BENEFITS

  • Compact design

  • Wide range

  • Standard motor

  • Service-friendly

  • Various types of shaft seals depending upon liquid, temperature and pressure.

APPLICATIONS

Circulation of hot or cold water in:

  • Heating systems

  • District heating plants

  • Local heating plants

  • Domestic hot water systems

  • Cooling and air conditioning systems

PC MultiDirect

The PC MultiDirect (replacing PC22) is a modern microprocessor-controlled photometer with a user-friendly keyboard and large graphic display,  It features a broad selection of pre-programmed methods based on the proven range of Lovibond reagent tablets, liquid reagents, vial tests and powder reagents (VARIO Powder Packs).  Moreover, you can also store your own methods.  The calibration option, including software-supported adjustment , means that the PC MultiDirect photometer can be used as a testing instrument.  The 7 standard rechargeable batteries (supplied) allow portable use. An intelligent, integrated charge controller allows battery charging (using the supplied power pack) whilst the instrument is in operation.  The PC MultiDirect can also be operated without power pack using alkaline batteries.  This is an optional extra item at additional cost. (Handheld meters, one each for conductivity and Ph, are provided with each new order of Elysators, per Powerplant.)

 

 

Parameters - The PC MultiDirect can be used for the following tests:  Alkalinity-m, Alkalinity-p, Aluminum, Ammonia, Bromine, Calcium Hardness, Chloride, Chlorine, Chlorine Dioxide, COD, Copper, Cyanuric Acid, DEHA, Flouride, Hydrogen Peroxide, Iron, Manganese, Molybdate, Nitrate, Ozone, pH, Phosphate, Potassium, Silica, Sulphate, Sulphide, Sulphite, Total Hardness, Total Nitrogen, Urea and Zinc.   Parameters are in bold letters.  These detailed tests are recommended every 3 months.

� Copyright 2010. International Water Treatment NA.  All rights reserved.